MX5 Plus PTFE Lubricant

Extreme pressure lubrication, superior penetration, quality anti-corrosion protection with PTFE

Product information

EXTREME PRESSURE LUBRICATION, QUALITY ANTI-CORROSION PROTECTION, SUPERIOR PENETRATION

INOX mx5 Plus has been specially formulated by modifing the original INOX base formula together with the addition of a high grade friction modifier – Polytetrafluoroethylene.

INOX mx5 Plus has been designed for applications where a superior extreme pressure, anti-corrosion, anti-moisture liquid lubricant, a high grade penetrating oil or an industrial quality machine cutting lubricant is required (Safe to use in saw, lathe & milling reservoirs).

Key features

  • INOX mx5 Plus will not harm metal points or surfaces, fibreglass, formica, painted or enamel finishes, plastics or neoprene seals.

  • INOX mx5 Plus will not become tacky, alter surface tolerances, dry out or wash off with water
  • INOX mx5 Plus is non-toxic, non-conductive, non-corrosive and non-staining.
  • Polytetrafluoroethylene (PTFE) is premium grade extreme pressure anti-friction medium which gives increased lubrication ability between the contact surfaces. This reduced friction environment also lowers operating temperatures.
  • Kosher Certificate K-ID DZH-PBQH Status Pavere
  • INOX mx5 Plus is Food Grade Approved (Type A) Australia
  • The Instrument of Approval is freely available on request and can be downloaded from the download site at the bottom of the INOX mx5 Plus MSDS page.
  • The Kosher Certificate can be downloaded from the same page.
Application & Uses

Cars & motorcycles: Starter motor, alternator, generator and solenoid shaft bushes – wiper motors and linkages – inner control cables – motorcycle clutch and accelerator cables (Ideal for classic/vintage heavy clutch cables)

Cold climate lubricant: Ski bindings and snow board clips – snow mobile tracks, door hinges, locks and control cables – chair lift cables (prevents icing) – cold storage door locks and hinges, helps prevent switches, solenoid and valves icing up.

Electrical: all electric motor bushes – solenoid shaft assemblies – relay and switch gear pivot point bushes.

Farming: Chain and sprocket drives – PTO splines and couplings – shearing hand pieces and equipment – control cables and linkages – winch cables – stock gate hinges and latches.

General: Pin bearings, bushes, screw & worm drives – slides & small linear bearings.

Hobbies: Model train engine bushes and gears, rolling stock wheels and track switching points – all moving parts for model sailing and power boats, model cars, slot cars and tracks and model planes

Industrial & mining: Electric and pneumatic power tools – punching, stamping and folding equipment – conveyor and pneumatic systems lubricators – cutting, drilling and thread tapping – release agent (ie plastics, metal, etc) – factory roller doors – underground pump motor bushes.

Marine & shipping : Sail tracks – door hinges and locks – sliding hatches and pulleys – control cables – winch cables – high speed sail and line winders – sea container hinges and latches

Recreational uses: All firearms – roller blades and skate boards – gym and sporting equipment – mountain and racing pushbike chains, cables and wheel bearing hubs

Truck, bus & trailer: Pneumatic door tracks and linkages – side curtain tracks alloy/stainless steel roller doors and tracks – air brake slack adjusters – inner control cables all starter motors, generators, alternators and wiper motors and all linkages, door hinges stock crate hinges and latches and any other application where an extreme pressure anti-corrosion liquid lubricant is required

Caution: INOX MX5 Plus may effect some natural rubber products with continual long term use (refer to LANOX)

INOX® QUALITY PRODUCTS “There is no substitute for Quality”

Technical Information
ASTM 1298DENSITY @15.6°C0.865
ASTM D97POUR POINT-13°C
ASTM D92FIRE POINT204°C
DIELECTRIC33
ASTM D1744KARL FISHER WATER254.4 ppm
ASTM D445VISCOSITY @ 40°C10.86
VISCOSITY @ 100°C2.74
ASTM D2509Timken, OK load Kg20
ASTM IP2394 – Ball Weld Test – Kgf275
Downloads
  • INOX MX5 PLUS AEROSOL

  • INOX MX5 PLUS

  • NSF CERTIFICATE MX5 AEROSOL 22.12.10

  • NSF CERTIFICATE MX5 BULK 22.12.10

Privacy Settings
We use cookies to enhance your experience while using our website. If you are using our Services via a browser you can restrict, block or remove cookies through your web browser settings. We also use content and scripts from third parties that may use tracking technologies. You can selectively provide your consent below to allow such third party embeds. For complete information about the cookies we use, data we collect and how we process them, please check our Privacy Policy
Youtube
Consent to display content from Youtube
Vimeo
Consent to display content from Vimeo
Google Maps
Consent to display content from Google