MX3FG Lubricant “Food Grade”

For food & beverage processing machinery & equipment.

Product information


Spraying on surfaces creates an anti-rust film to protect from any corrosion or moisture that can occur. It penetrates between moving parts to eliminate any binding or sticking, while keeping them well lubricated.

INOX MX3FG was released to cater specifically for the food and beverage industry. INOX-MX3FG holds the NSF,  class H1 food grade approval which is the highest approval available for incidental contact with food for lubricants. As a result, this lubricant is recognised worldwide and therefore allows INOX-MX3FG to be used in all food applications all over the world.

INOX-MX3FG is similar to the original formula with some changes to comply with the NSF H1 criteria. INOX-MX3FG has undergone stringent testing and stands strong among the other INOX products and even stronger with its competitors.

Key features

  • Displaces, penetrates, lubricates and protects
  • Contains no silicon, acid, kerosene, dieselene or toxic compounds
  • Will not harm metal points or surfaces, plastics, paints, enamels, fibreglass, formica or neoprene seals
  • Doesn’t dry out, gum up, become gooey or sticky or wash off with water
  • Non-toxic, non-static, non-corrosive non-conductive and non-staining
  • Odourless, no dye or masking agents added
Application & Uses

There are over 1001 uses for INOX MX3. So there is 1002 uses for MX3FG as it can have incidental contact with food.


What does NSF approved mean?
The National Sanitation Foundation (NSF) is an independent, non-profit making organisation. The NSF H1 standard is globally accepted as confirming the food grade lubricant is safe for use in applications where incidental food contact may occur.

H1 – Acceptable for use where there is incidental food contact.
H2 – Acceptable for use where there is no possibility of food contact.
H3 – Acceptable for use as a soluble oil
HT1 – Acceptable for use as a heat transfer fluid where this is possibility of incidental food contact
3H – Acceptable for use as a release agent on hard surface in direct contact with meat and poultry

Can INOX-MX3FG come in contact with food?
Yes, the NSF H1 approval allows “incidental contact with food”.

Is the INOX-MX3FG the same as the original formula?
No, the formula is similar but needs to be different to comply with the NSF guideline’s.

INOX® QUALITY PRODUCTS “There is no substitute for Quality”

Technical Information

ASTM 1298DENSITY @15.6°C0.852
ASTM D445VISCOSITY @ 40°C10.04
VISCOSITY @ 100°C2.54

Privacy Settings
We use cookies to enhance your experience while using our website. If you are using our Services via a browser you can restrict, block or remove cookies through your web browser settings. We also use content and scripts from third parties that may use tracking technologies. You can selectively provide your consent below to allow such third party embeds. For complete information about the cookies we use, data we collect and how we process them, please check our Privacy Policy
Consent to display content from - Youtube
Consent to display content from - Vimeo
Google Maps
Consent to display content from - Google