MX11 Chain & Brake Cleaner
Readily removes oil, grease & brake fluid without disassembly, leaving surfaces clean and dry.
INOX-mx11 CHAIN & BRAKE CLEAN is a fast acting degreaser for removing brake fluid, oil, grease or oil/grease dirt contaminants from chains and brake assemblies (including linings and pads) before or after disassembly, leaving them bone dry and squeaky clean in a matter of minutes with no residue.
INOX-mx11 Chain & Brake Clean readily dissolves oil, grease and grime and can be used as a degreaser for car, motorbike, truck, boat, industrial, mining, farming equipment parts, gears, cables, engines or on any equipment where there is contamination from any oil, grease or oil/grease dirt mixtures.
INOX-mx11 Chain & Brake Clean is a solvent based cleaner that dries in minutes and leaves no residue. In instances where the oil/grease and dirt is caked on, a second application maybe required and at the same time it is advisable to use a firm non-metallic bristled cleaning brush to help loosen any caked on contaminant.
CAUTION: Avoid direct contact with rubber and perspex and prolonged contact with neoprene and plastics. Use in a well ventilated area.
Application & Uses
INOX-mx11 Chain & Brake Clean readily dissolves brake fluid, oil, grease and grime and can be used as a degreaser for the following.
- Disc Brake assemblies, disc brake pads – before and after disassembly.
- Brake shoes and backing plates, master and slave cyclinders.
- Brake cables, inner control and steering cables.
- Clutch plates and pressure plate assemblies
- Petrol and diesel engines and their component parts.
- Motorbike, bicycle and go-kart chains and sprockets.
- Endless, machinery hoist and vehicle hoist chains.
- Forklift hoist and industrial machinery chains and cables.
- Winch cables and chains
- PTO’s, farm and mining machinery chain and sprocket drives.
- All machinery and equipment component parts
Motorcycles: INOX-mx11 Chain & Brake Clean is ideal for cleaning gritty oil and dirt residue off bike chains and sprockets, leaving them clean and dry and ready for lubrication. INOX-mx9 No Chukka Chain Lube with PTFE is recommended for motorbike chains & sprockets.
INOX-mx9 No Chukka Chain Lube with PTFE can be used quite effectivly to lubricate most chains and cables, but for heavier applications, INOX-mx8 Spray Grease is more suited for these types of applications.
(INOX-mx8 Spray Grease is a Lithium complex and PTFE based exterme pressure, high temperature grease that is highly resistant to water wash-out, salt and chemicals).
CAUTION: When using INOX-mx11 Chain & Brake Clean avoid direct contact with rubber and perspex and prolonged contact with neoprene and plastics. Use in a well ventilated area.
INOX® QUALITY PRODUCTS “There is no substitute for Quality”